Help installing ML on Linux Mint 21.2 Cinnamon

Hello,

I recently made the switch from Windows to Linux Mint. I really like the cleanliness, lack of telemetry collection, etc. But I've been having a lot of trouble with installing packages and software due to my lack of knowledge. I would assume that this is one such case.

I've followed a guide for installing ML on Linux via Wine:
https://forum.maplelegends.com/index.php?threads/installing-ml-on-linux-guide-updated.41984/

I believe I did everything properly from copying the code to install the 32-bit Wine, placing the DLLs in the right folder and replacing the files as stated in the guide. However, when I follow the last code:

Code:

$ cd /home/<username>/MapleLegends/MapleLegends && wine ./MapleLegends.exe

This is what the terminal says:


From there I just assumed that the terminal language changed or something, and looked up the internet for syntax.


This command did nothing either. I've looked in the internet for around 3 hours by now, but I cannot figure it out. If there are any Linux gods out there, I would appreciate the help. Any information would be appreciated, even basic advice (since I'm completely new to Linux). Just want to play maple again T.T

(P.S. Here is my computer info below in case you need it.)

Spoiler: System Information

Code:

System:
  Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0 Desktop: Cinnamon 5.8.4
    tk: GTK 3.24.33 wm: muffin dm: LightDM Distro: Linux Mint 21.2 Victoria base: Ubuntu 22.04 jammy
Machine:
  Type: Desktop Mobo: ASRock model: X370 Taichi serial: <superuser required>
    UEFI: American Megatrends v: P3.20 date: 09/08/2017
CPU:
  Info: 8-core model: AMD Ryzen 7 1700X bits: 64 type: MT MCP arch: Zen rev: 1 cache: L1: 768 KiB
    L2: 4 MiB L3: 16 MiB
  Speed (MHz): avg: 2219 high: 3579 min/max: 2200/3400 boost: enabled cores: 1: 3547 2: 3578
    3: 1748 4: 1744 5: 1749 6: 1749 7: 1889 8: 1751 9: 3579 10: 3494 11: 1748 12: 1747 13: 1851
    14: 1828 15: 1749 16: 1755 bogomips: 108800
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: NVIDIA GA104 [GeForce RTX 3070 Ti] vendor: ASUSTeK driver: nvidia v: 535.129.03 pcie:
    speed: 2.5 GT/s lanes: 16 ports: active: none off: DP-2,HDMI-A-1 empty: DP-1,DP-3,HDMI-A-2
    bus-ID: 0e:00.0 chip-ID: 10de:2482
  Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: nvidia
    unloaded: fbdev,modesetting,nouveau,vesa gpu: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3640x1920 s-dpi: 96
  Monitor-1: DP-2 pos: primary,bottom-l res: 2560x1440 dpi: 109 diag: 685mm (27")
  Monitor-2: HDMI-0 pos: top-right res: 1080x1920 dpi: 102 diag: 551mm (21.7")
  OpenGL: renderer: NVIDIA GeForce RTX 3070 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 535.129.03
    direct render: Yes
Audio:
  Device-1: NVIDIA GA104 High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
    pcie: speed: 8 GT/s lanes: 16 bus-ID: 0e:00.1 chip-ID: 10de:228b
  Device-2: AMD Family 17h HD Audio vendor: ASRock driver: snd_hda_intel v: kernel pcie:
    speed: 8 GT/s lanes: 16 bus-ID: 12:00.3 chip-ID: 1022:1457
  Sound Server-1: ALSA v: k5.15.0-91-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: no
  Sound Server-3: PipeWire v: 1.0.0 running: yes
Network:
  Device-1: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi v: kernel pcie:
    speed: 2.5 GT/s lanes: 1 bus-ID: 09:00.0 chip-ID: 8086:24fb
  IF: wlp9s0 state: down mac: <filter>
  Device-2: Intel I211 Gigabit Network vendor: ASRock driver: igb v: kernel pcie:
    speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 0b:00.0 chip-ID: 8086:1539
  IF: enp11s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-9:3
    chip-ID: 8087:0aa7
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 1100
Drives:
  Local Storage: total: 1.36 TiB used: 947.05 GiB (67.8%)
  ID-1: /dev/nvme0n1 vendor: Western Digital model: WDBRPG5000ANC-WRSN size: 465.76 GiB
    speed: 31.6 Gb/s lanes: 4 serial: <filter> temp: 45.9 C
  ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme Portable SSD size: 931.51 GiB
    serial: <filter>
Partition:
  ID-1: / size: 456.88 GiB used: 57.02 GiB (12.5%) fs: ext4 dev: /dev/nvme0n1p3
  ID-2: /boot/efi size: 512 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p2
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 14 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002
  Device-1: 1-4:2 info: Logitech G203 Gaming Mouse type: Mouse,HID driver: hid-generic,usbhid
    rev: 2.0 speed: 12 Mb/s chip-ID: 046d:c084
  Device-2: 1-9:3 info: Intel Wireless-AC 3168 Bluetooth type: Bluetooth driver: btusb rev: 2.0
    speed: 12 Mb/s chip-ID: 8087:0aa7
  Device-3: 1-11:4 info: NZXT Kraken X type: HID driver: nzxt-kraken2,usbhid rev: 2.0
    speed: 12 Mb/s chip-ID: 1e71:170e
  Hub-2: 2-0:1 info: Super-speed hub ports: 8 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
  Device-1: 2-3:2 info: SanDisk Extreme Portable SSD type: Mass Storage driver: uas rev: 3.1
    speed: 5 Gb/s chip-ID: 0781:558c
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002
  Device-1: 3-3:2 info: SONiX USB DEVICE type: Keyboard,Mouse driver: hid-generic,usbhid
    rev: 2.0 speed: 12 Mb/s chip-ID: 320f:5016
  Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
Sensors:
  System Temperatures: cpu: 34.1 C mobo: N/A gpu: nvidia temp: 50 C
  Fan Speeds (RPM): fan-1: 499 gpu: nvidia fan: 0%
Repos:
  Packages: 2463 apt: 2452 flatpak: 11
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb http: //packages.linuxmint.com victoria main upstream import backport
    2: deb http: //archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
    3: deb http: //archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
    4: deb http: //archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
  Active apt repos in: /etc/apt/sources.list.d/pipewire-debian-pipewire-upstream-jammy.list
    1: deb [signed-by=/etc/apt/keyrings/pipewire-debian-pipewire-upstream-jammy.gpg] https: //ppa.launchpadcontent.net/pipewire-debian/pipewire-upstream/ubuntu jammy main
  Active apt repos in: /etc/apt/sources.list.d/unityhub.list
    1: deb [signed-by=/usr/share/keyrings/Unity_Technologies_ApS.gpg] https: //hub.unity3d.com/linux/repos/deb stable main
  Active apt repos in: /etc/apt/sources.list.d/vscode.list
    1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main
  Active apt repos in: /etc/apt/sources.list.d/winehq-jammy.sources
    1: deb [arch=amd64 i386] https: //dl.winehq.org/wine-builds/ubuntu jammy main
Info:
  Processes: 380 Uptime: 1h 33m Memory: 31.27 GiB used: 3.36 GiB (10.8%) Init: systemd v: 249
  runlevel: 5 Compilers: gcc: 11.4.0 alt: 11/12 Client: Unknown python3.10 client inxi: 3.3.13

(P.P.S. I'm not sure if ML Staffs supports Linux so I didn't put it in Technical Support part of the forums. Please let me know if I am wrong about this.)

 

Thank you for your reply!
I initially tried cd and it didn't work so I assumed that it was because I started my terminal off the desktop or something... but after you mentioned it, I gave it another try at it and something else happened. ML didn't open, but it looks like something seems to work... Here is the message.



I'm a bit hopeful because it says something like virtual setup, which sounds like it's related to wine. But I still have no idea.

If I can't figure it out I'll try to uninstall and reinstall wine and redownload ML.

 

Thanks for the reply kiwiz!
Unfortunately I tried every resolution but none of them work.

At this point, though, I may have tinkered with it too much without knowing the consequences. I'll try again with a fresh install tomorrow!